| Product Specifications | Connector Type | Insertion Loss |
|---|---|---|
| SC/PC/SM Bare Ferrule, 0.5 μm Concentricity | SC-SC/PC/SM Bare Ferrule, 0.5 μm Concentricity | ≤0.2 dB |
| SC/PC/SM Bare Ferrule, 1.0 μm Concentricity | SC/PC/SM Bare Ferrule, 1.0 μm Concentricity | ≤0.3 dB |
| SC/PC/SM Bare Ferrule, 1.4 μm Concentricity | SC/PC/SM Bare Ferrule, 1.4 μm Concentricity | ≤0.4 dB |
| SC/PC/SM Ferrule with Metal Holder, 0.5 μm Concentricity | SC/PC/SM Ferrule with Metal Holder, 0.5 μm Concentricity | ≤0.2 dB |
| SC/PC/SM Ferrule with Metal Holder, 1.0 μm Concentricity | SC/PC/SM Ferrule with Metal Holder, 1.0 μm Concentricity | ≤0.3 dB |
| SC/PC/SM Ferrule with Metal Holder, 1.4 μm Concentricity | SC/PC/SM Ferrule with Metal Holder, 1.4 μm Concentricity | ≤0.4 dB |
Material System
The ferrule body is made from zirconia ceramic, selected for its wear resistance, mechanical strength, and dimensional stability. Available options include bare ceramic ferrules and ferrule assemblies with metal holders. The metal holder material and finish can be specified according to the connector design and assembly requirements.
Applications
| Model | Bore Diameter “d” | Bore-to-OD Concentricity “D” | Outer Diameter “C” |
|---|---|---|---|
| SC Single-Mode | 0.125 (+0.001/0) | ≤0.0005 / ≤0.001 | 2.4990 ± 0.0005 |
| SC Single-Mode | 0.1255 (+0.001/0) | ≤0.0005 / ≤0.001 | 2.4990 ± 0.0005 |
| SC Single-Mode | 0.126 (+0.001/0) | ≤0.0005 / ≤0.001 | 2.4990 ± 0.0005 |
Bore tolerances and concentricity requirements are specified for each selected model. Final dimensions are subject to the confirmed drawing.
The drawings below show the dimensions of the bare SC ceramic ferrule and the ferrule with holder. All dimensions are in millimeters.

Frequently Asked Questions
1. What are these ceramic ferrules used for?
They are used in SC/PC and SC/UPC single-mode fiber optic connector assemblies, including patch cords and pigtails for telecom, FTTH, and data center connections.
2. What material are the ferrules made from?
The ferrule body is made from zirconia ceramic for wear resistance and dimensional stability. Both bare ferrules and ferrules with holders are available.
3. What is the outer diameter?
The nominal outer diameter is 2.5 mm. The specified outer diameter is 2.4990 ± 0.0005 mm, as shown in the technical specifications.
4. Which bore sizes and concentricity grades are available?
Bore diameter options include 0.125, 0.1255, and 0.126 mm. Available concentricity grades include 0.5, 1.0, and 1.4 μm. Please confirm the required combination and tolerances before ordering.
5. Are PC and UPC ferrules interchangeable?
PC and UPC refer to different end-face polishing specifications. Matching dimensions alone do not confirm interchangeability. Please specify whether you need an unpolished ferrule or a finished PC/UPC end face when ordering.
6. Does the ferrule alone determine insertion loss?
No. Insertion loss also depends on the optical fiber, bore alignment, end-face polishing, cleanliness, and assembly quality. Any insertion loss requirement should be confirmed with the relevant test conditions.
7. Can you supply ferrules to OEM customers in the USA, Germany, Japan, and Europe?
Yes. CERAMPRO serves OEM customers in these markets. Send us your drawing or required bore size, concentricity, holder configuration, and quantity so we can confirm specifications and provide a quotation.