When choosing a metering pump, start with how your machine uses the liquid. Does it need a steady flow, or does it dispense a fixed amount at a time? For steady flow, specify how much liquid you need per minute. For individual doses, specify how much you need each time and how often the machine dispenses it.
Then check what liquid the pump will handle, what pressure it will work against, and how it will connect to your equipment. These details help the supplier recommend a precision metering pump for your application.
A pump can use both materials. A ceramic piston and sleeve may do the metering, while stainless steel is used for fittings or other parts. When comparing pumps, ask which parts actually come into contact with the liquid and what grade each part is made from.
| Material | Why it may be selected | What to check |
|---|---|---|
| Alumina ceramic | Provides a hard, wear-resistant surface for pistons and sleeves. | Check fluid compatibility and whether the liquid contains hard particles that could enter the piston-to-sleeve clearance. |
| Stainless steel | Offers toughness for parts that may be exposed to impact during handling or assembly. | Check the specific grade against the process liquid, concentration, temperature, and cleaning chemicals. |
A ceramic metering pump with a closely fitted piston and sleeve is worth considering for clean liquids. For corrosive or high-purity liquids, review every wetted part, including any seals and fittings. The ceramic grade is one part of that review. View the CERAMPRO alumina ceramic metering pump.
Say your line fills 30 containers per minute and each needs 2 mL. That works out to 60 mL per minute on average. For pump selection, give the supplier both figures that describe the filling cycle, 2 mL per dose and 30 doses per minute. For a continuous process, give the minimum, normal, and maximum flow rates.
Once you have the dose or flow range, gather the rest of the operating details.
Ask whether the quote covers the pump assembly, drive, controller, and fittings. Knowing what comes with the pump helps you compare quotes and plan what your machine needs to provide.
Ask which liquid, pressure, and operating settings the supplier will use during testing. If every container gets one dose, request individual dose readings so you can see how much the output varies from one cycle to the next.
Ask whether the piston and sleeve can be ordered individually or should be replaced as a matched pair. If you already have the pump, send a drawing or mark the part you need on a photo. View alumina ceramic metering pump core components.
For initial sizing, it helps. To confirm the pump can keep up with the machine, also share how much of each cycle is available for dispensing, especially if the nozzle has to stop while the next container moves into place.
Hard particles can scratch the working surfaces or cause the piston to stick in a close-clearance design. Tell the supplier the particle size and concentration, if known, so they can assess whether the pump is suitable.
Ask for results at the lowest flow rate your process actually uses and at a representative discharge pressure. Agree on how long to collect the liquid and how the measured output will be compared with the target.
Send CERAMPRO your equipment drawing, liquid specification, target dose or flow rate, operating pressure, and quantity. Let us know whether you need a complete metering pump or replacement ceramic parts, and include any acceptance criteria you already have. Contact CERAMPRO about your metering pump application.